Posts and Columns – Interior design Idea


An interior post supports the floor, ceiling, and walls of a home. It is typically made of timber, though metal, stone, and other materials can be used as well. Strut and stud are similar, but may serve a different purpose. A strut may simply act as a brace or to carry a beam. If you’re unsure, it’s best to have a professional inspect it first.


There are various terms for posts that are not part of the exterior of a building. A story post is a term used in platform framing. A ridge post extends from the ground to the ridge beam. A puneon is a large, heavy, split log. It is often used to support the ridge beam on a roof. In jetty framing, it is known as a dragon post.


Other terms for an interior post include the ridge post, intermediate post, and corner post. These terms refer to posts that are not in the exterior of a building. An interior post is the term for a post that is not in an exterior wall. A ridge beam is typically supported by the ridge post. A prick is a type of prick, while a puncheon is a split log or heavy slab of timber.


Decorative columns are made of two pieces bonded together. The first part of the column is called the king, which is the uppermost part of the column. This post has a curved shape, and a flat top section. An integral bracket is used to support the lower timber, which may be supported by a king post. A king post strut is a type of lintel truss, and it often has a canted shape.


A column is the main structural member of a building. It bears loads on its top portion. Decorative columns are also commonly known as gunstock. The two halves of a post are joined together at their bottom support. Because of this, a post can’t hide seams because it’s already done so much work. You can easily identify the seams by removing the capital at the top of the post. If you’re in doubt, pulling the capital off the top of the post can save you time and frustration.


To determine if a column is load-bearing or not, you should measure the distance from the base of the column and its width. Check the construction of the columns by looking at the exterior of the building. Some columns have a decorative post on the front, while others have a plain one on the back. Then it’s time to remove the capital and determine whether it is a load-bearing post or a decorative one.